car stereo antenna splitter
By admincar stereo antenna splitter
Coaxial CB radio antenna?
I have a single antenna on the vehicle. I have an antenna and radio for music. so I went to Amazon and buy adapter, one end of the antenna ter that enters a separator that has a coaxial cable end and an end ter CB Radio / AM / FM splitter i bought for you if you do not understand how I described it: (Http: / / www.amazon.com/FireStik-AR-1A-Matchmaker-antenna-splitter/dp/B000RF26FK/ref=sr_1_2?ie=UTF8&qid=1297491594&sr=8-2), so I need my radio antenna (which is in my car) to have a cb radio coax him. "I can connect a coaxial cable ter at the end of a regular radio antenna to go after divider? if not, where or what I can buy as far as an adapter for a radio antenna coaxial cable to a CB radio to go next to that divider?
Hi I think misinterpreted the installation requirements. To use the splitter to remove the original antenna of the car and install in its place a proper CB antenna. Then the cable coaxial antenna that will go to the splitter box and connect to the socket as shown in the Amazon image. Splitter box is a cable that will plug into the radio car, and another cable goes into the CB series. The main point to understand is that you no longer use the car radio antenna original. !
car stereo antenna splitter
Upgrading the sound system is usually one of the first modifications attempted when we talk about car customization. The best place to start is a good unit chief. If you plan to install it yourself, read on to get some advice from our experienced fitters.
You will need the tools to do the job, so start collecting screwdriver (flathead and Phillips), the sleeves of a set of tubes, clamps, spacers, butt connectors or heat shrink, electrical tape, zip ties, solder and a soldering iron and a little patience.
The first thing to do before installing I would suggest buying the stereo wiring harness for a vehicle application. It make installation easier for you if you are a beginner, and allows for easy replacement of the stock radio (if you decide to sell the vehicle in the future) and change or improvement of a head unit different spare.
Start by disconnecting negative battery cable. This will ensure that you do not accidentally cross-wired and record a new piece of equipment. Then remove the hard primary school age. If you need to see how it is in your vehicle, you can search for automotive applications installdr.com. This an excellent resource to see the pictures of how to remove the main unit. Once released, disconnect the wiring harness and the antenna of the main unit and remove completely.
There are two types of wiring harnesses, you can get. Not Universal wiring that connects to your existing electrical wiring for cars, and the unfinished cable ends that connect to the color code son on your new head unit. There is also a wiring harness having a harness on the two ends, and everything clicks into place on both sides. These are the easiest to install, but perhaps more difficult to find OT to match your car to the main unit. Most games are universal type of cables, so that it will focus on. If you have found the wiring harness, you will find the color code on the back son device. The cables from the main unit and electrical wiring must match. The son of head of unit and wiring will be partially set for easy installation. There are several good ways to connect the cables. One way is to use the butt connectors that bend the wire in a connector. These can be picked up at almost any place that sells / installs head units, or Walmart, etc. My favorite way requires a soldering iron and heat decreases sleeves. The son very tight. Apply enough solder to weld together two son. Now I sometimes parallel to one of the cables. Slide the sleeve over the connection and heat with a heat gun or hair dryer good. I had to reconfigure or repair systems where butt connectors have been used, but it could be installed wrong, and not a problem with the connectors themselves. I never had any of the soldered connections fail.
Once all connections are made and heated and shrunk sleeves Instead, I want to make a zip tie and tie it all together. Clip the bridle too much for a clean look finished. Plug the power cord from the main unit for the wiring harness connected to the vehicle. Connect the antenna (it can find what you need an antenna adapter in some applications). Now slide the head unit in place, but it seems for the moment. Reconnect the negative battery cable and turn on the camera head (Make sure the key is in the ACC). Must function properly at this point. If you plan to add an amplifier, or have bought one of this setting, turn off the device and plug the RCA cables. Running across the board and the board of AMP (read more about how to do it successfully this in future articles).
Majestic Modifications is the complete car customization concept, specializing in car accessories, cold air intakes and performance upgrades, body kits and exterior accessories, glow gauges and interior accessories, wheels and tires, mobile video, car audio and electronics. If you encounter problems, you can email support@majesticmodifications.com for help, or visit our Car Audio Installations Blog.
Majestic Modifications is your online source for auto accessories, auto parts, car audio installations advice and technical support.
|
|
C. Crane FMT Digital FM Transmitter with AC Adapter $34.95 The FM Transmitter is a way to listen to streaming or MP3 audio. Just plug it into the headphone jack of your computer's speakers or sound card and listen on any FM radio anywhere in the house. It does this by taking the audio and turning it into an FM radio broadcast. Use it to send a satellite radio signal, MP3 audio, and more, to nearby radios around your home or workplace, even in your car.... |
|
|
Scosche FM-MOD02 Universal Audio Input FM Modulator for iPod, Satellite Radio or Portable Music Player $39.99 FOR ALL MP3 PLAYERS & PORTABLE AUDIO DEVICESCONNECTS ANY MP3 OR SATELLITE RADIO TO CAR STAREODIRECTLY CONNECTS TO THE STEREO ANTENNA INPUT FOR CLEAR SOUND & LESS STATIC INTERFERENCEINCLUDES DIRECT CONNECT FM MODULATOR WITH 2 SELECTABLE FREQUENCIES 24" AUDIO CABLES & UNIVERSAL MOUNT HOUSINGUPC : 033991022171Shipping Dimensions : 9.50in X 6.00in X 2.60inEstimated Shipping Weight : 0.8928... |
|
|
Peripheral / PAC IS77 Universal iPod Dock and 3.5mm Input for FM Radios $42.95 COMPATIBLE WITH ALL IPOD MODELSTRANSMITS STEREO AUDIO TO FM RADIO FROM IPOD MP3 OR OTHER AUDIO SOURCE WHILE CHARGING DEVICEVIDEO OUTPUT FROM VIDEO-CAPABLE IPOD MODELSWIRED FM TRANSMITTER WITH STEREO RCA INPUTKIT INCLUDES 5-FT IPOD A/V CABLE WITH APPLE IC 6-FT 3.5MM DASH/PANEL MOUNT AUDIO INPUT CABLE & 4-FT 3.5MM TO 3.5MM AUDIO CABLE & 3.5MM TO RCA ADAPTERUPC : 609098799942Shipping Dimensions : 6.4... |
|
|
Terk XMICRO2 Single INPUT High Performance Roof Mount XM Antenna $49.95 MOUNTS TO VEHICLES VIA THE ROOF WITH ITS MAGNETIC BASE & RUBBERIZED FEET23-FT MICRO-COAXIAL CABLE CONNECTS TO ANY IN-CAR XM RADIO WITH A SINGLE ANTENNA INPUTCABLE ALSO CONNECTS TO XM PLUG & PLAY RADIOSINCLUDES ANTENNA CABLE RUBBER GROMMET RIGHT ANGLE ANTENNA CONNECTOR & INSTRUCTIONSUPC : 044476028229Shipping Dimensions : 6.70in X 5.20in X 0.70inEstimated Shipping Weight : 0.3... |
|
|
Channel Master Distribution Amplifier 8-Way 4 DB 50-1000 MHZ Professional Grade Performance $55.95 Channel Master by PCT multimedia RF amplifiers and splitters are commercial grade, and can be used in HDTV, CATV, off-air, analog, and digital RF distribution applications where performance and reliability are required. Gain: 8 dB. Operating frequency: 50... |
US $38.55
Post a Comment